Informasi untuk Penulis

Interested in submitting to this journal? We recommend that you review the About the Journal page for the journal's section policies, as well as the Author Guidelines. Authors need to register with the journal prior to submitting or, if already registered, can simply log in and begin the five-step process.

TERM AND PROCEDURES FOR WRITING ARTICLES

 

The manuscript preferably in the form of research, ranging from 8 pages, original and has not and will never be loaded / published in other media.

Manuscripts received by the editor not later than two months before the month-publishing.

Innovation in Sustainable Engineering publishes original articles on various engineering disciplines, including but not limited to mechanical engineering, civil engineering, environmental engineering, chemical engineering, and electrical engineering.

The journal's aim is to advance and disseminate knowledge in all the related areas on the development of technologies, methods, and solutions that support sustainability in sectors such as renewable energy, environmentally friendly materials, efficient system design, and the processing and management of natural resources

 

Submission of papers:

Please use online submission system to submit to the journal. The direct link is https://journal.ciptacendekia.org/index.php/insure/about/submissions

 

 

Ensure that the following items are present:

One author has been designated as the corresponding author with contact details:

• E-mail address
• Full postal address

All necessary files have been uploaded:

Manuscript:

• Include keywords
• All figures (include relevant captions)
• All tables (including titles, description, footnotes)
• Ensure all figure and table citations in the text match the files provided
• Indicate clearly if colour should be used for any figures in print

Further considerations

• Manuscript has been 'spell checked' and 'grammar checked'
• All references mentioned in the Reference List are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Internet)
• A competing interests statement is provided, even if the authors have no competing interests to declare.

Journal policies detailed in this guide have been reviewed.

Ethics in publishing

Please see our information pages on Ethics in publishing

Changes to authorship

Authors are expected to consider carefully the list and order of authors before submitting their manuscript and provide the definitive list of authors at the time of the original submission. Any addition, deletion or rearrangement of author names in the authorship list should be made only before the manuscript has been accepted and only if approved by the journal Editor. To request such a change, the Editor must receive the following from the corresponding author: (a) the reason for the change in author list and (b) written confirmation (e-mail, letter) from all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author being added or removed.

Only in exceptional circumstances will the Editor consider the addition, deletion or rearrangement of authors after the manuscript has been accepted. While the Editor considers the request, publication of the manuscript will be suspended. If the manuscript has already been published in an online issue, any requests approved by the Editor will result in a corrigendum.

 

Open access

Articles are freely available to both subscribers and the wider public with permitted reuse.

An open access publication fee is payable by authors or on their behalf, e.g. by their research funder or institution.

Regardless of how you choose to publish your article, the journal will apply the same peer review criteria and acceptance standards.

Language and language services

Please write your text in good English (American or British usage is accepted, but not a mixture of these). The Editors suggest avoidance of usage of first person (we, us, our) in the text. Please note that poor language may cause the rejection of the manuscript.

Submit your article

Please submit your article via

https://journal.ciptacendekia.org/index.php/insure/about/submissions

 

Manuscripts previously rejected by the Journal will not be re-considered by the Editors, and therefore will be rejected without review.

 

MANUSCRIPT PREPARATION

General:

Authors must follow guide for authors strictly, failing which the manuscripts would be rejected without review. Editors reserve the right to adjust the style to certain standards of uniformity.

 

Structure:

Follow this order when typing manuscripts: Title, Authors, Affiliations, Abstract, Keywords, Introduction, Materials and Methods, Results and Discussion, Conclusions, Acknowledgements, References, Figure Captions, Tables and Figures. The corresponding author should be identified with an asterisk and footnote. All other footnotes (except for table footnotes) should be avoided. Collate acknowledgements in a separate section at the end of the article and do not include them on the title page, as a footnote to the title or otherwise.

 

Text Layout:

Follow article template here

Page length:

Maximum page length should be 10 pages including text, references, tables and figures.

 

Peer review

All contributions will be initially assessed by the editor for suitability for the journal. Papers deemed suitable are then typically sent to a minimum of two independent expert reviewers to assess the scientific quality of the paper. The Editor is responsible for the final decision regarding acceptance or rejection of articles. The Editor's decision is final.

 

ARTICLE STRUCTURE

1.Background

State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results. This should not be more than three pages in general.

2. Methods and implementation

Provide sufficient details to allow the work to be reproduced by an independent researcher. Methods that are already published should be summarized, and indicated by a reference. If quoting directly from a previously published method, use quotation marks and also cite the source. Any modifications to existing methods should also be described.

Theory/calculation

A Theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lay the foundation for further work. In contrast, a Calculation section (as part of Materials and Methods) represents a practical development from a theoretical basis. Do not give here basics or fundamental principles or known information.

3.Results and Discussion

Results should be clear and concise, and be part of a single section, discussing the significance of the results of the work, not repeat them. Extensive citation and discussion of the published literature should be avoided.

4.Conclusions and Recommendations

The main conclusions drawn from results should be presented in a short Conclusions section.

There can be only one person as corresponding author and manuscript must be submitted by the corresponding author.

 

Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formula. Maximum length are 12 words.

 

Author names and affiliations. Please clearly indicate the given name(s) with expanded initials and family name(s) of each author and check that all names are accurately spelled. Provide the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.

 

Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Submission of manuscript should be made by the Corresponding author. This responsibility includes answering any future queries about Methodology and Materials. Ensure that the e-mail address is given and that contact details are kept up to date by the corresponding author.

 

Abstract

A concise and factual abstract is required. Each paper should be provided with an abstract of about 150-200 words. The abstract should state briefly the main aim of the study, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.

 

Keywords

Immediately after the abstract, provide a maximum of 5 keywords to be included in an article, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, "and", "of"). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.

 

ABBREVIATIONS

Define each abbreviation in full on first appearance in text. No abbreviation should be used in title, abstract, and section headings.

 

Acknowledgements

Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).

 

Figure captions

Ensure that each illustration has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration.

 

Tables

Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article. Note that the maximum number of figures allowed for Original article, case study, and review papers is 6. The Journal discourages publication of simple one parameter tables; such information should be preferably described in the text itself.

 

Citation in text (IEEE)

Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text.

Indicating the relevant reference in the text

 A number enclosed in square brackets, eg.[1] or [26], placed in the text of the essay, indicates the relevant reference.

Each reference number should be enclosed in square brackets on the same line as the text, before any punctuation, with a space before the bracket.

Citations are numbered in the order in which they appear in the text and each citation corresponds to a numbered reference containing publication information about the source cited in the reference list at the end of the publication, essay or assignment.

Once a source has been cited, the same number is used in all subsequent references.

No distinction is made between print and electronic references when citing within the text.

Here are some examples of this kind of referencing :

 

"...end of the line for my research [13]."

"The theory was first put forward in 1987 [1]." "Scholtz [2] has argued that......."

"Several recent studies [3, 4, 15, 16] have suggested that..."

"For example, see [7]."

 

It is not necessary to mention either the author(s) or the the date of the reference unless it is relevant to your text.

It is not necessary to say " in reference [26] ..." "In [26] ..." is sufficient.

Citing more than one reference at a time

 

When citing more than one source at a time, the preferred method is to list each reference number separately with a comma or dash between each reference:

 

Preferred

[1], [3], [5]

[1] - [5]

 

 Although the following method is also acceptable:

Acceptable

[1, 3, 5]

[1-5]

 

Citing a reference multiple times

 When citing a source for a second or subsequent time, do not use ibid or op. cit.

 

 In the text, repeat the earlier reference number.

 

 If referring to a different page number, or other reference, within the source, use the following forms:

 

[3, pp. 5-10], [3, Ch.  2, pp. 6-21], [3, Fig. 1], [3, Sec. 4.5]

 

(IEEE) References Examples

[1] A. Rezi and M. Allam, "Techniques in array processing by means of transformations, " in Control and Dynamic Systems, Vol. 69, Multidemsional Systems, C. T. Leondes, Ed. San Diego: Academic Press, 1995, pp. 133-180.